NOTICE: WE DO NOT SHIP

In Store Pick-Up in Bend, Oregon

Audi

  1. 2022 Audi Q7 - Receiver Hitch - Stealth Hitches

    We installed a 2" receiver hitch onto a 2022 Audi Q7. The hitch was manufactured from Stealth Hitches. Hitch towing capacity is 8,000 lbs and has a 800 lbs tongue weight. This hitch's tongue can be temporarily removed when not in use; installation should be done by trained specialists as it required us to remove the bumper fascia.
    Read more »
  2. 2022 Audi Q3 - Crossbars, Hitch and Bike Rack - Thule / Stealth / Kuat

    We installed crossbars, a hitch, and bike rack onto a 2022 Audi Q3. They crossbars were manufactured by Thule and attached the vehicles existing flush using Fit Kit 186091, Flush Rail foot set, and Wingbar Evo 127B. This crossbar setup has a weight capacity rating up to 165lbs. Attached to the rear of the vehicle is the 2" receiver Stealth Hitch, this hitch's tongue can be temporarily removed when not in use; installation should be done by trained specialists as it required us to remove the bumper fascia. Sliding into the hitch is the Kuat Sherpa 2.0 bike rack, this bike rack can accommodate up to 2 bikes as long as they are not Electric or Fat-Tire style bikes.
    Read more »
  3. 2021 Audi E-tron - Crossbars - Thule

    We installed crossbars 2021 Audi E-tron. The crossbar setup was manufactored by Thule and has weight capacity rating of 165lbs. These crossbars are equipped with a channel within the bars to allow mounting for certain accesories. They are attached to the vehicle using Thule Flush Rail feet and Kit 186046. Installation difficulty was moderate. 

    Read more »
  4. 2021 Audi Q3 - Receiver Hitch - Stealth Hitches

    We installed a 2" receiver hitch onto a 2021 Audi Q3. The hitch was manufactored by Stealth Hitches. The hitch was manufactured by Stealth Hitches and has a tongue weight capacity rating of 600lbs and a gross trailer weight capacity rating of 6,000lbs. The installation was difficult and required us to remove the bumper fascia and should be done by trained specialists only. 

    Read more »
  5. 2021 Audi Q3 - Crossbars and Kayak Racks - Thule

    We installed crossbars and kayak racks onto a 2021 Audi Q3. The crossbars and kayak racks were manufactored Thule. On this setup, the kayak rack known as the Thule Hullavator is mounted into the channel of the crossbars. The Hullavator is equipped with a gas strut to help ease the process of loading and unloading the kayak as it comes down to the side of the vehicle. The load capacity of the Hullavator is 75lbs per boat. 

    Read more »
  6. 2020 Audi A6 Allroad - Receiver Hitch - Stealth

    We installed a 2" reciever hitch onto a 2020 Audi A6 Allroad. The hitch we used is manufactored by Stealth #SHR3002. This hitch has a 600 lbs tongue weight capacity and a 6000 lbs gross trailer weight capcity. Something unique about this hitch is that it has the ability to remove the receiver tongue when not need while the hitch remains on the vehicle. This hitch was tedious to install and should be done by trained specialists. 

    Read more »
  7. 2015 Audi Allroad - Crossbars & Ski Rack - Thule

     

    We installed crossbars and ski rack onto a 2015 Audi Allroad. The crossbars and ski rack are manufactured by Thule. The feet we used are Rapid Crossroads and the crossbars we used are Aeroblades, they are equipped with channel mount capability which is how the ski rack is attached. The ski rack

    Read more »
  8. 2018 Audi Q5 - Receiver Hitch - Curt

    We installed a 2" receiver hitch onto a 2018 Audi Q5. The hitch we found that works best for this vehicle is manufactured by Curt, hitch #13331. This hitch's capacity is rated for 5,000 lbs gross trailer weight and 750 lbs tongue weight. The install required us to temporarily remove the bumper fascia. The bike rack that is featured in the hitch is manufactured by Kuat, known as the Sherpa 2.0. This bike rack has the

    Read more »
  9. 2016 Audi Q5 - Receiver Hitch and Wiring - Curt

    Today we installed a 2 inch receiver hitch and 4 way flat wiring harness onto a 2016 Audi Q5. The hitch and wiring we found that works best for this vehicle is manufactured by Curt, hitch #13136 and wiring kit #56404. This receiver hitch is rated for 5,000 lbs gross trailer weight and 750 lbs tongue weight. The wiring required us to remove trunk plastic panels and run wires to the battery located in the back

    Read more »
  10. 2019 Audi Q5 - Roof Platform and Accessories - Rhino Rack

    Read more »
Page