In Store Pick-Up in Bend, Oregon
We installed a platform and bike racks onto a 2021 GMC Canyon. This is a Pioneer Platform made by Rhino Rack and is attached to the vehicle with what is known as a Backbone. To attach the Backbone to the vehicle we secured it to the existing fixed points within the vehicles weather stripping that runs the length of the vehicle as well as drilling into the vehicle to create other mounting locations using rivnuts. The Roam Adventure Co. boxes are attached to the platform by having a few holes drilled through them with bolts to attach to plates underneath the boxes that slide into the Pioneer platforms existing slat channels. In the bed of the truck the customer already had a Retrax XR pro and crossbars so all we had to do was mount some bike racks. The bike racks are Thule's TopRide which require you to take off the front wheel of each to bike to
We installed crossbars onto a 2020 GMC Denali HD. The square bar crossbars were manufactured by Thule and are attched to the vehicle with Thule Evo Clamp foot setup using Kit 145071. This crossbar setup has weight capacity rating of 165lbs.
We installed a truck bed rack onto a 2020 GMC Sierra with preexisting Retrax XR tonneau cover. The truck bed rack system is called an Overhaul manufactured Yakima, this system has a load capacity rating of 500 lbs and can be raised up and down for desired height. The installation of this rack was easy to do as the racks slid into the Retrax's accessory bed rails.
We installed a crossbars onto a 2020 GMC Sierra. This crossbar setup was manufactured by Rhino Rack, using their QMFK08 fit kit which sits into the existing weather strip location; we were able to then attach the quick release RLT 600 feet. The crossbars for this setup used VA150B, these crossbars feature channel mount capability and have a weight capacity of 165lbs. This installation was tedious and should be done by specialist.
We installed a truck bed slide storage system onto a 2015 GMC 2500. The sliding storage system was manufactured by CargoGlide and has a weight capacity rating up to 1000lbs. This install was difficult due to the minimal spacing and should be done by specialists.
This weekend we installed a roof rack track system on the canopy of a 2019 GMC Canyon. The roof rack track system we found that would work best for this canopy uses Thule's Top Track Pair, combined with Rhino Rack's RLT600 feet and VA137B crossbars. Having a track system gives you the advantage to move the feet any desired position within the track length. The VA137B crossbars from Rhino Rack have track