NOTICE: WE DO NOT SHIP

In Store Pick-Up in Bend, Oregon

Jeep

  1. 2022 Jeep Wrangler - Winch, Platform, Sidesteps - Warn / Rhino Rack / RockSlide Engineering

    We installed a winch, backbone platform system, and sidesteps onto a 2022 Jeep Wrangler. The winch was manufactured by Warn Industries using parts # 87310, 100650 and 101255. This installation was tedious and required us to take apart the entire front bumper to attach the winch and make sure the electrical components work. This was no easy process and required multiple hours of work from our trained specialists. The platform setup was manufactured by Rhino Rack and is supported using their Backbone system. This installation required us to drill into the hardtop of the vehicle and install metal supports on the inside that line up with the roof fixtures to go where the bases are positioned. Attaching to the bases is the pioneer platform that has channels that run the length of the slates for mounting of accessories such as the ones pictured (sunseeker awning, hi-lift jack, recovery boards). This installation
    Read more »
  2. 2018 Jeep Grand Cherokee - Crossbars - Yakima

    We installed crossbars onto a 2018 Jeep Grand Cherokee. The crossbars were manufactured by Yakima and attached to the vehicles existing flush rails using Landing Pad 18, Skyline foot pack, and Corebar crossbars. This setup has a weight capacity rating of 165 lbs. The installation required some pre-assembly of parts and screwed into fixed points in the flush rails.
    Read more »
  3. 2022 Jeep Wrangler - Crossbars and Backbone - Rhino Rack

    We installed crossbars and backbone system onto a 2022 Jeep Wrangler. The setup was manufactured by Rhino Racks and is supported by their Backbone system. This installation required us to drill into the hardtop of the vehicle and install metal supports on the inside that line up with the roof fixtures to go where the bases are positioned. Attached to the bases are RLT600 feet and VA150B crossbars. This installation should be done by trained specialists.
    Read more »
  4. 2021 Jeep Gladiator - Platform and Backbone - Rhino Rack

    We installed a platform backbone system onto a 2021 Jeep Gladiator. The platform backbone system was manufactured by Rhino Rack. This installation required us to drill into the hardtop of the vehicle and install metal supports on the inside that line up with the roof fixtures to go where the feet are positioned on the platform. The Pioneer Platform is made up of multiple slats that have a channels which run through the middle of each piece to allow for mounting of future accessories.
    Read more »
  5. 2017 Jeep Wrangler - Platform and Backbone - Rhino Rack

    We installed a platform and backbone system onto a 2017 Jeep Wrangler. The setup was manufactured by Rhino Racks and is supported by their Backbone system. This installation required us to drill into the hardtop of the vehicle and install metal supports on the inside that line up with the roof fixtures to go where the feet are positioned on the platform. The platform is made up of multiple slats that have a channels which run through the middle of each piece to allow for mounting of future accessories.
    Read more »
  6. 2022 Jeep Grand Cherokee - Crossbars & Cargo Box - Yakima / Thule

    We installed crossbars and a cargo box on to a 2022 Jeep Grand Cherokee. The crossbars were manufactured by Yakima and are made up of three pieces: Landing Pad 19, Skyline Towers, and Corebar. These crossbars attach to the vehicles existing flush side rails by screwing into the given locations. Attached to the Force XT XL cargo box manufactured by Thule. This cargo box provides 18 cubic feet of storage and is equipped with tie downs inside the box for more secure mounting.
    Read more »
  7. 2018 Jeep Grand Cherokee - Crossbars - Rhino Rack

    We installed crossbars onto a 2018 Jeep Grand Cherokee. The crossbars we used were manufactured by Rhino Rack. The products we used were the RCP Base Kit that attached to the vehicles existing metal rails, attached to the base kit was the RCL Locking Leg that supports the VA126B crossbars, these crossbars feature a channel that runs through the bar for mounting certain accessories. The weight capacity rating for this setup is 165lbs. 

    Read more »
  8. 2021 Jeep Wrangler 4EX - Sidesteps - Aries Automotive

    We installed side steps onto a 2021 Jeep Wrangler 4XE Hybrid. These steps are manufactured by Aries Automotive and are known as Rocker Steps part #2074118. The double-tube layout and 3" wide top plate provide a solid step. These steps mount into preexisting holes in the frame. Installing these steps requires basic tool knowledge and having an extra pair of hands would be helpful. 

    Read more »
  9. 2017 Jeep Wrangler - Roof Rack - Garvin Wilderness

    We installed a roof rack onto a 2017 Jeep Wrangler. This roof rack was manufactured by Garvin Wilderness. To install this rack it required us to drill into the vehicle and install stabilization brackets. This installation was tedious and should be done by professionals.

    Read more »
  10. 2020 Jeep Gladiator - Truck Bed Rack, Side Steps - Yakima / Westin

    We installed a truck bed rack and side steps onto a 2020 Jeep Gladiator. The truck bed rack is the Overhaul system manufactured by Yakima, this system is height adjustable and has a weight capacity rating of 500lbs. The side step we used were manufactured by Westin, they are attached with brackets to the underside of the frame.

    Read more »
Page