In Store Pick-Up in Bend, Oregon
We installed sidesteps, crossbars and a cargo basket onto a 2019 Toyota 4runner. The sidesteps were manufactured by N-Fab and bolted onto the vechiles frame. The crossbars are known as the Timberline Kit and they attached by wrapping around the vehicles existing siderails. Attached to the crossbars is the cargo basket known as the Skinny Warrior, this basket provides storage up to 58 inches long and 23 inches wide. We also attached a Thule RodVault 4 to the crossbars, it is made to carry up to 4 pairs of flyfishing rods.
We installed a truck bed rack accessory bars and accessories onto a 2020 Toyota Tundra. The truck bed rack and bars are manufactured by Yakima and is known as the Overhaul HD System. The side bars have a channel that runs through them allowing for accessories to be mounted. The red containers attached to the side bars are known as Rotopax, they are used to store 2 extra gallons of gasoline each. The black boards attached to the side bars are known as Maxtrax, they are used as a recovery device to get unstuck. Both of these products have mounting hardware that is sold separately.
We installed a rear double swing out bumper onto a 2020 Toyota Tacoma. The rear bumper was manufactured by CBI Offroad Fab. and features a swing out spare tire mount, swing out gas pack mount, and a 2" hidden hitch receiver that can be accessed by flipping the vehicles license plate up. The bumper weighs 200lbs without the addition of a spare tire and gas. The installation on this vehicle was difficult as it required an extra pair of hands and mechanical expertise.
We installed a bed slide onto a 2020 Toyota Tundra. The bed slide is manufactured by CargoGlide part number: CG1000XL-7548. This bed slide can slide out 100% and support up to 1,000 lbs. The installation was difficult as it required us to drill into the bed of the truck and secure the base of the bed slide with the provided hardware. Having a trained mechanical specialist and an extra pair of hands is highly recommended for this install.
We installed crossbars and sidesteps onto a 2021 Toyota Tacoma. The crossbar setup was manufactured by Yakima and installed using their Landing Pad 24, Skyline foot pack, and Jetstream crossbars. The sidesteps were manufactured by Westin Automotive and are secured to the vehicle using the existing weld nuts in the frame.
We installed a platform rack on to a 2020 Toyota Rav 4. The platform was manufactured by Prinsu and has planks with track mount channels for future accessories to be mounted. This install required us to drill into the vehicle to attach support brackets for the platform, it was tedious and should be done by profesionals.
We installed crossbars and a cargo box onto a 2019 Toyota 4runner. The crossbars and cargo box were manufactured by Thule. The crossbars are attached to the vehicle using the Rapid Crossroads feet that wrap around the existing raised side rails. The cargo box is the Motion XT XL, which provides up to 18 cubic feet of storage and can carry skis up to 200 cm.
We installed a RSI SmartCap Canopy onto a 2021 Toyota Tacoma. The canopy is forged from steel, not fiberglass; making it one of the strongest in the industry. This model canopy is from their EVOc Commercial line with the addition of the Roller Rack; a heavy-duty roof rack with ample tie-downs for securing your load. It holds 330 lbs when in motion and 770 lbs static. Installation was difficult and required a large amount of space and strength.
We installed a RSI SmartCap Canopy onto a 2021 Toyota Tacoma. The canopy is forged from steel, not fiberglass; making it one of the strongest in the industry. The customer choose to purchase additional components for their canopy which included the Kitchen-Bin, Drawer-Bin, and StowAway Table. Installation was difficult and required a large amount of space and strength.
We installed track and crossbars onto a 2019 Toyota Tundra. The crossbars are supported via RLT 600 feet that are mounted into RTS track within the vehicles weather stripping. Mounting the RTS track within the weather stripping required us to drill into the vehicle. This installation is tedious and should be done by professionals.