We installed a ladder onto a 2021 Toyota 4runner. The ladder was manufactured by Frontrunner Outfitters and it came unassembled. The ladder is constructed of black powder coated high strength steel.
We installed a hitch and wiring onto a 2022 Toyota Rav4. The hitch has a 6,000 lbs. gross trailer weight and 900 lbs. tongue weight. The install of the hitch was fairly easy as it attaches via existing weld nuts built into the frame of the vehicle. The 7-way electrical adapter plugs into the 4-way wiring to allow for trailer lighting.
We installed a Front Runner platform onto a 2021 Toyota 4runner today. To mount the platform we had to remove the vehicles existing side rails. The platform is equipped with track that runs along each slat in the platform to allow for future mounting of accessories.
We installed sidesteps, crossbars and a cargo basket onto a 2019 Toyota 4runner. The sidesteps were manufactured by N-Fab and bolted onto the vehicles frame. The crossbars are known as the Timberline Kit and they attached by wrapping around the vehicles existing side rails. Attached to the crossbars is the cargo basket known as the Skinny Warrior, this basket provides storage up to 58 inches long and 23 inches wide. We also attached a Thule RodVault 4 to the crossbars, it is made to carry up to 4 pairs of fly fishing rods.
We installed crossbars and a cargo box onto a 2019 Toyota 4runner. The crossbars and cargo box were manufactured by Thule. The crossbars are attached to the vehicle using the Rapid Crossroads feet that wrap around the existing raised side rails. The cargo box is the Motion XT XL, which provides up to 18 cubic feet of storage and can carry skis up to 200 cm.
We installed a platform rack onto a 2021 Toyota 4Runner TRD. This is a Pioneer Platform made by Rhino Rack and is attached to the vehicle with what is known as a Backbone. To attach the Backbone to the vehicle we secured it to the existing fixed points and weather stripping. The Pioneer Platform has planks with track mount channels for future accessories. The load rating capacity is 220 lbs.
We installed NFAB Predator Pro side steps onto a 2018 Toyota 4runner. These side steps are constructed out of aluminum and add an accessible look to the vehicle. The installation used existing mount points in the vehicles frame.