We installed a 2" receiver hitch onto a 2022 Audi Q7. The hitch was manufactured from Stealth Hitches. Hitch towing capacity is 8,000 lbs and has a 800 lbs tongue weight. This hitch's tongue can be temporarily removed when not in use.
We installed crossbars, a hitch, and bike rack onto a 2022 Audi Q3. They crossbars were manufactured by Thule and attached the vehicles existing flush using Fit Kit 186091, Flush Rail foot set, and Wingbar Evo 127B. This crossbar setup has a weight capacity rating up to 165lbs. Attached to the rear of the vehicle is the 2" receiver Stealth Hitch, this hitch's tongue can be temporarily removed when not in use. Sliding into the hitch is the Kuat Sherpa 2.0 bike rack, this bike rack can accommodate up to 2 bikes as long as they are not Electric or Fat-Tire style bikes.
We installed crossbars 2021 Audi E-tron. The crossbar setup was manufactured by Thule and has weight capacity rating of 165lbs. These crossbars are equipped with a channel within the bars to allow mounting for certain accessories. They are attached to the vehicle using Thule Flush Rail feet and Kit 186046.
We installed a 2" receiver hitch onto a 2021 Audi Q3. Manufactured by Stealth Hitches, this hitch has a tongue weight capacity rating of 600lbs and a gross trailer weight capacity rating of 6,000lbs.
We installed a 2" reciever hitch onto a 2020 Audi A6 Allroad. The hitch we used is manufactured by Stealth #SHR3002. This hitch has a 600 lbs tongue weight capacity and a 6000 lbs gross trailer weight capacity. Something unique about this hitch is that it has the ability to remove the receiver tongue when not need while the hitch remains on the vehicle.
We installed crossbars and ski rack onto a 2015 Audi Allroad. The crossbars and ski rack are manufactured by Thule. The feet we used are Rapid Crossroads and the crossbars we used are Aeroblades,
We installed a 2" receiver hitch onto a 2018 Audi Q5. The hitch we found that works best for this vehicle is manufactured by Curt, hitch #13331. This hitch's capacity is rated for 5,000 lbs gross trailer weight and 750 lbs tongue weight. The install required us to temporarily remove the bumper fascia. The bike rack that is featured in the hitch is manufactured by Kuat, known as the Sherpa 2.0. This bike rack has the capacity to handle two mountain or road bikes that weigh under 40lbs each.
Today we installed a 2 inch receiver hitch and 4 way flat wiring harness onto a 2016 Audi Q5. The hitch and wiring we found that works best for this vehicle is manufactured by Curt, hitch #13136 and wiring kit #56404. This receiver hitch is rated for 5,000 lbs gross trailer weight and 750 lbs tongue weight. The wiring required us to remove trunk plastic panels and run wires to the battery located in the back of the car.