We installed a winch, backbone platform system, and sidesteps onto a 2022 Jeep Wrangler. The winch was manufactured by Warn Industries using parts # 87310, 100650 and 101255. This installation was tedious and required us to take apart the entire front bumper to attach the winch and make sure the electrical components work. This was no easy process and required multiple hours of work from our trained specialists.
The platform setup was manufactured by Rhino Rack and is supported using their Backbone system. This installation required us to drill into the hardtop of the vehicle and install metal supports on the inside that line up with the roof fixtures to go where the bases are positioned. Attaching to the bases is the pioneer platform that has channels that run the length of the slates for mounting of accessories such as the ones pictured (sunseeker awning, hi-lift jack, recovery boards). This installation was tedious and requires a second pair of hands.
The sidesteps were manufactured
We installed a platform and backbone system onto a 2022 Toyota Rav4. The platform and backbone were manufactured by Rhino Rack using part numbers 52109F and RTRB1. The backbone rail system was installed into fixed points along the vehicles existing flush rails and attached to those rails was the pioneer platform that we preassembled before installations. This platform has channels that run the length of the slats for mounting of future accessories.
We installed crossbars and a backbone platform onto a 2018 Chevrolet Colorado. All products involved are manufactured by Rhino Rack. The crossbars were installed over the cab of the vehicle using Quick Mount Ditch Bracket part #QMFK08, Quick Mount Leg part #RLT600, and Vortex Bars part #VA126B. Attached to the crossbars is the XTray Large basket that has a load capacity rating of 165lbs. Installation of the Backbone Pioneer Platform system was made up of two parts; the Backbone Rails #RUMB1, and the Pioneer Platform part #52102F. Both of these installations required us to drill into either into the vehicle or the canopy and should be done by trained specialists.
We installed a platform backbone system onto a 2021 Jeep Gladiator. The platform backbone system was manufactured by Rhino Rack. This installation required us to drill into the hardtop of the vehicle and install metal supports on the inside that line up with the roof fixtures to go where the feet are positioned on the platform. The Pioneer Platform is made up of multiple slats that have a channels which run through the middle of each piece to allow for mounting of future accessories.
We installed a platform rack onto a 2021 Toyota 4Runner TRD. This is a Pioneer Platform made by Rhino Rack and is attached to the vehicle with what is known as a Backbone. To attach the Backbone to the vehicle we secured it to the existing fixed points and weather stripping. The Pioneer Platform has planks with track mount channels for future accessories. The load rating capacity is 220 lbs.