curtmfg

  1. 2016 Cadillac SRX - Receiver Hitch and Wiring - DrawTite / Curt

    We installed a 2" receiver hitch and wiring harness onto a 2016 Cadillac SRX. The hitch we used was manufactured by DrawTite Hitches #75682. This hitch has a tongue weight capacity of 400lbs and gross trailer weight capacity of 4,000lbs. The installation for this hitch uses pre-existing weld nuts in the frame that the hitch attaches to. The wiring harness manufactured by Curt #56096, plugs into existing OEM vehicle socket to provide a 4-way flat socket. 

    Read more »
  2. 2014 Subaru WRX - Receiver Hitch - Curt

    We installed a 1.25 inch receiver hitch onto a 2014 Subaru WRX. This hitch was manufactured by Curt and has a tongue weight capacity of 200 lbs and gross trailer weight capacity of 2,000 lbs. This install was tedious dealing with an after market exhaust, it should be done by professionals.

    Read more »
  3. 2007 Mercedes ML 500 - Receiver Hitch - Curt

    We installed a Curt 2" receiver hitch onto a 2007 Mercedes ML 500. The hitch #13018 is a class 3 receiver hitch to 3,500 lbs. gross trailer weight and 350 lbs. tongue weight. This install required a bumper removal and used preexisting weld nuts.

    Read more »
  4. 2020 Toyota Rav4 - Receiver Hitch - Curt

    We installed a Curt 2" receiver hitch onto a 2020 Toyota Rav4. The hitch #13146 is a class 3 receiver hitch rated to 6,000 lbs. gross trailer weight and 900 lbs. tongue weight. This install used preexisting weld nuts.

    Read more »
  5. 2018 KIA Sedona LX - Roof Racks, Cargo Box, Hitch, Hitch Platform - Curt / Thule

    We installed roof racks, cargo box, receiver hitch & wiring, and a hitch platform onto a 2018 KIA Sedona LX. The 2 inch receiver hitch we installed using the vehicles existing weld nuts was manufactured by Curt, #13115. This hitch has a weight carrying capacity of 4,000 lbs and tongue weight rating of 400 lbs.

    Read more »
  6. 2018 Audi Q5 - Receiver Hitch - Curt

    We installed a 2" receiver hitch onto a 2018 Audi Q5. The hitch we found that works best for this vehicle is manufactured by Curt, hitch #13331. This hitch's capacity is rated for 5,000 lbs gross trailer weight and 750 lbs tongue weight. The install required us to temporarily remove the bumper fascia. The bike rack that is featured in the hitch is manufactured by Kuat, known as the Sherpa 2.0. This bike rack has the

    Read more »
  7. 2016 Audi Q5 - Receiver Hitch and Wiring - Curt

    Today we installed a 2 inch receiver hitch and 4 way flat wiring harness onto a 2016 Audi Q5. The hitch and wiring we found that works best for this vehicle is manufactured by Curt, hitch #13136 and wiring kit #56404. This receiver hitch is rated for 5,000 lbs gross trailer weight and 750 lbs tongue weight. The wiring required us to remove trunk plastic panels and run wires to the battery located in the back

    Read more »
  8. 2019 BMW 328d - Receiver Hitch - Curt

    Today we installed a 1 1/4 inch hitch onto a 2019 BMW 328d. The hitch we found that works best for this vehicle is manufactured by Curt, hitch #11367. To install this hitch we had to remove the bumper. This hitch weight capacity is rated for 2,000 lbs gross trailer weight and 200 lbs tongue weight.

     

    Read more »
  9. 2019 Mazda CX5 - Hitch Receiver - Curt

    Today we installed a hitch on a 2019 Mazda CX5. The hitch we found that would work best for this vehicle was manufactured by Curt, hitch #13315.

    Read more »
  10. 2019 Subaru Crosstrek - Hitch Receiver - Curt

    Today we installed a receiver hitch on a 2019 Subaru Crosstrek. The hitch we found that would work best for this vehicle was manufactured by Curt, hitch #13382. This hitch's capacity is rated for 3,500 lbs gross trailer weight and 525 lbs tongue weight.

    Read more »
Page