We installed a 2" receiver hitch and wiring onto a 2020 Ford Ranger. The hitch was manufactored by Drawtite and has a tongue weight capactiy rating of 1,125lbs and a gross trailer weight capacity rating of 7,500lbs. The installation of the hitch and wiring was difficult and should be done by trained specalists only.
We installed a 1.25" receiver hitch onto a 2021 Kia Stinger. The hitch was manufactured by Drawtite and has a tongue weight capacity rating of 200lbs and a gross trailer weight capacity rating of 2,000lbs. The installation was difficult and should be done by trained specalists.
We installed a 2" receiver hitch and wiring harness onto a 2016 Cadillac SRX. The hitch we used was manufactured by DrawTite Hitches #75682. This hitch has a tongue weight capacity of 400lbs and gross trailer weight capacity of 4,000lbs. The installation for this hitch uses pre-existing weld nuts in the frame that the hitch attaches to. The wiring harness manufactured by Curt #56096, plugs into existing OEM vehicle socket to provide a 4-way flat socket.
This weekend we installed a 2" receiver hitch on a 2019 Volvo XC60. The hitch we found that would work best for this vehicle was