We've installed a custom track onto this canopy, and paired it with a Rhino Rack Setup. This setup gives you strength while keeping a low profile. Here we have Thule Track, Rhino Rack Vortex Bars, and RLT600 feet. This custom track is permanently mounted to the fiberglass, but the crossbars are removable.
We installed a platform rack onto a 2020 Toyota Tacoma. This is a Pioneer Platform made by Rhino Rack and is attached to the vehicle with what is known as a Backbone. To attach the Backbone to the vehicle we secured it to the existing fixed points and weather stripping. The Pioneer Platform has planks with track mount channels for future accessories. The load rating capacity is 220 lbs.
We did a track installation with platform onto a 2019 Toyota Tacoma. The platform is from the Pioneer series manufactured by Rhino Rack. This platform is weight rated for 220lbs and is equipped with channels within the panels for mounting accessories. The platform is supported via RLT 600 feet that are mounted into RTS track within the vehicles weather stripping. Mounting the RTS track within the weather stripping required us to drill into the vehicle. This installation is tedious and should be done by professionals.
We installed canopy crossbars onto a 2019 Ford F150. The crossbar setup we found that would work best for the vehicle is manufactured by Rhino Rack. The crossbars we used are VA 150B and are attached to the vehicle with RLT 600 feet. The SUP rack is made by Thule known as the SUP Taxi, this device is made to carry 2 paddle boards at a time and locks the strap in position for security.
We installed a track style canopy rack with water sport accessories onto a 2020 Chevrolet Colorado. The roof rack system we found that works best for fiberglass canopies is made by Rhino Rack. This installation required us drill through the canopy and install the track using bolts, nuts and silicone sealant. Once attached, the feet that we used are Rhino Racks RLT 600's paired with VA 165B crossbars which have channel mount capability. The water sport accessories include a Thule's Hull-a-port XT kayak carries (channel mounted) and the SupTaxi. The weight capacity for this setup is rated for 165lbs.
We installed a crossbars onto a 2020 GMC Sierra. This crossbar setup was manufactured by Rhino Rack, using their QMFK08 fit kit which sits into the existing weather strip location; we were able to then attach the quick release RLT 600 feet. The crossbars for this setup used VA150B, these crossbars feature channel mount capability and have a weight capacity of 165lbs. This installation was tedious and should be done by specialist.
We installed crossbars onto a 2019 Toyota Highlander. The crossbars are manufactured by Rhino Rack. For this setup we used RCH Locking Legs, RCP Base Kit, and VA126B Vortex Bars. This setup has a weight capacity rating up to 220lbs, and the VA126 bars are equipped with channel mount capability for mounting sport racks. These crossbars have the ability to come off the vehicle easily with the quick release pins located inside the RCH Locking Legs.
We installed a platform rack onto a 2020 Toyota Tacoma. The platform is from the Pioneer series manufactured by Rhino Rack. This platform is weight rated for 220lbs and is equipped with channels within the panels for mounting accessories. The platform is supported via RLT 600 feet that are mounted into RTS track within the vehicles weather stripping.
We installed a platform roof rack onto a 2020 Toyota Tacoma. This is a Pioneer Platform made by Rhino Rack and is attached to the vehicle with what is known as a Backbone. To attach the Backbone to the vehicle we secured it to the existing fixed points and weather stripping. The Pioneer Platform has planks with track mount channels for future accessories. The load rating capacity is 220 lbs.