We installed a canopy onto a 2021 Toyota Tacoma. The canopy was manufactured by RSI SmartCap which is one of the strongest canopies in the industry constructed from steel it can support up to 330lbs of payload when moving, 770lbs when parked.
We installed a truck bed cover and rack onto a 2022 Toyota Tundra. The truck bed cover was manufactured by Retrax part #T-60861. Known as the RetraxONE XR model, it features channels that run with length of the side rails to allow mounting of bed racks. The truck bed rack was manufactured by Yakima and is known as the Overhaul HD setup. Featuring an adjustable height from 19"- 30" to create custom set-ups for maximum utility and versatility. This system has a maximum on-road weight rating of 500lbs and off-road of 300lbs.
We installed a platform and backbone system onto a 2022 Toyota Rav4. The platform and backbone were manufactured by Rhino Rack using part numbers 52109F and RTRB1. The backbone rail system was installed into fixed points along the vehicles existing flush rails and attached to those rails was the pioneer platform that we preassembled before installations. This platform has channels that run the length of the slats for mounting of future accessories.
We installed a truck bed cover and crossbars onto a 2022 Toyota Tundra. The truck bed cover was manufactured by Retrax part number #T-80861, this is a retractable cover that has channels that run the length of the side rails to allow crossbars to be mounted. The crossbars were manufactured by Yakima using the Landing Pad 1, Skyline foot pack, and Jetstream crossbars.
We installed a pioneer platform and accessories onto a 2012 Toyota Tacoma. The pioneer platform was manufactured by Rhino Rack and attached to the canopy's pre-existing tracks. Inside the slats of the pioneer platform features a channel that allows for mounting of accessories such as the Rhino Rack Stow-It shovel/axe holder, Maxtrax vehicle recovery device, and the Rhino Rack Sunseeker awning. This installation was tedious and requires a second pair of hand to help lift the platform onto the vehicle.
We installed an awning onto a 2017 Toyota Tacoma. The Sunseeker 2.5m awning manufactured by Rhino Rack product # 32133, measures 87 in. High, 98 in. Long, and 83 in. Wide. This awning provides up to 55.38 sq ft shaded area for you and your family to relax in. It is attached to the vehicle by with t-bolt hardware that slides into Rhino Racks Vortex Crossbars accessory channels.
We installed crossbars onto a 2022 Toyota Tacoma. The crossbars were manufactured by Yakima and attach to the vehicle by clamping around the door frame and weather stripping. The crossbars are made up of a set of Yakima Baseline towers, Yakima Corebars, Baseclip 145 (front bar), Baseclip 128 (rear bar). This crossbar setup has a weight load capacity rating up to 165lbs.
We installed crossbars onto a 2021 Toyota Rav4. The crossbars were manufactured by Rhino Rack and were made up of three parts. The first piece required was the RCP Base Kit #RCP69-BK which fit into the vehicles existing flush rails. The Rhino Rack RCH4 feet attach to the base adapters along with the Vortex Aero crossbars. This setup provides a weight capacity rating of up to 165lbs.
We installed crossbars, a cargo box and a ski rack onto a 2020 Toyota Tacoma. The crossbars were manufactured by Rhino Rack and were made up of their RLT600 feet and VA150B bars that attached to the tracks on the roof of the Alu-Cab. Attached to the crossbars were the cargo box and ski rack, both manufactured by Thule. The cargo box is called the Vector Alpine, this is Thule's premiere line of cargo boxes and offers a felt-lined interior with integrated lighting and 13 cubic feet of storage. The ski rack is called the SnowPack and offers the ability to hold up to 4 pairs of skis.
We installed a 2" front receiver hitch onto a 2012 Toyota Tundra. The hitch #31198 was manufactured by Curt and attaches the vehicles frame. Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight.