We installed a truck bed cover and rack onto a 2022 Toyota Tundra. The truck bed cover was manufactured by Retrax part #T-60861. Known as the RetraxONE XR model, it features channels that run with length of the side rails to allow mounting of bed racks. The truck bed rack was manufactured by Yakima and is known as the Overhaul HD setup. Featuring an adjustable height from 19"- 30" to create custom set-ups for maximum utility and versatility. This system has a maximum on-road weight rating of 500lbs and off-road of 300lbs.
We installed a truck bed cover and crossbars onto a 2022 Toyota Tundra. The truck bed cover was manufactured by Retrax part number #T-80861, this is a retractable cover that has channels that run the length of the side rails to allow crossbars to be mounted. The crossbars were manufactured by Yakima using the Landing Pad 1, Skyline foot pack, and Jetstream crossbars.
We installed a 2" front receiver hitch onto a 2012 Toyota Tundra. The hitch #31198 was manufactured by Curt and attaches the vehicles frame. Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight.
Today we installed a Prinsu Rack onto a 2021 Toyota Tundra. The platform has planks with track mount channels for future accessories to be mounted. This install required us to drill into the vehicle to attach support brackets for the platform.
We installed a truck bed rack accessory bars and accessories onto a 2020 Toyota Tundra. The truck bed rack and bars are manufactured by Yakima and is Overhaul HD Truck Bed Rack. The side bars have a channel that runs through them allowing for accessories to be mounted. The red containers attached to the side bars are Rotopax 2 Gallon containers. The black boards attached to the side bars are Maxtrax, they are used as a recovery device to get unstuck. Both of these products have mounting hardware that is sold separately.
We installed a bed slide onto a 2020 Toyota Tundra. The bed slide is manufactured by CargoGlide part number: CG1000XL-7548. This bed slide can slide out 100% and support up to 1,000 lbs. The installation was difficult as it required us to drill into the bed of the truck and secure the base of the bed slide with the provided hardware.
We installed track and crossbars onto a 2019 Toyota Tundra. The crossbars are supported via RLT 600 feet that are mounted into RTS track within the vehicles weather stripping. Mounting the RTS track within the weather stripping required us to drill into the vehicle.
We installed a RSI SmartCap Canopy onto a 2013 Toyota Tundra. The RSI SmartCap is one of the strongest canopies in the industry constructed from steel it can support up to 330lbs of payload when moving, 770lbs when parked. The rooftop tent on top of the canopy is supported by the Yakima Skyline system that is held into place by the mounting channels built into the SmartCap.