Due to the naked roof of this Corolla, we decided to go with the Yakima Baseline System. Utilizing the door jams, this system is ideal for roofs without pre-existing rails or mounting points. With a load capacity of 165lbs, it is not recommended to be used to mount a rooftop tent. We've added a Yakima Windshield fairing to reduce wind noise while on the road.
Due to the naked roof of this RAM, we decided to go with the Yakima Baseline System. This system utilizes the door jam to clamp onto the roof, when there are no factory rails or fixed points available. Due to the weight capacity being 165, it is not recommended for people looking to get a rooftop tent. This time, we went with the Yakima Jetstream bars. Unlike the Corebar, these Jetstreams feature a T-Slot along the top, widening your mounting capabilities.
We installed an RSI SmartCap and Yakima Crossbars onto a 2021 Chevrolet Silverado 2500 HD. The RSI SmartCap is one of the strongest canopies in the industry constructed from steel it can support up to 330lbs of payload when moving, 770lbs when parked. The rooftop tent on top of the canopy is supported by the Yakima Skyline system that is held into place by the mounting channels built into the SmartCap.
We installed a truck bed rack and side steps onto a 2020 Jeep Gladiator. The truck bed rack is the Overhaul system manufactured by Yakima, this system is height adjustable and has a weight capacity rating of 500lbs. The side step we used were manufactured by Westin, they are attached with brackets to the underside of the frame.
We installed a truck bed rack onto a 2020 GMC Sierra with preexisting Retrax XR tonneau cover. The truck bed rack system is called an Overhaul manufactured Yakima, this system has a load capacity rating of 500 lbs and can be raised up and down for desired height. The installation of this rack was easy to do as the racks slid into the Retrax's accessory bed rails.
We installed an electric tonneau cover and truck bed rack system onto a 2019 Ford Raptor. The tonneau cover was manufactured by Retrax, this model is electrically powered so you can open and close it hands free. The truck bed rack system is called an Overhaul manufactured Yakima, this system has a load capacity rating of 500 lbs and can be raised up and down for desired height. This install was tedious and is recommended to be done by specialist.
We installed a roof rack and cargo basket onto a 1997 Land Rover Discovery. The feet we used attached to the vehicles existing gutters rails are manufactured by Rhino Rack called RL280. The crossbars we used are VA150B and have track mount capability. Attached to those bars is a cargo basket manufactured by Yakima called the MegaWarrior and is designed to increase storage.
Yesterday we installed crossbars with ski and bikes racks onto a bed cover for a 2020 Chevy Silverado 1500 Trail Boss. The bed cover we used for this vehicle is the Retrax XR. This bed cover has channels that run along side the rail system that aloud the feet and crossbars to be attached. The bed covers weight capacity is rated for 500lbs and retracts into a cylinder that is closest to the cab. The crossbar setup we used is from Yakima using their Skyline feet and Jetstream crossbars that have channel mount capability. Attached to the crossbars is a Yakima FatCat 6 ski rack, this rack is made to carry up to 6 pairs of skis or 4 snowboards. Also attached to the crossbars is a Yakima HighRoad bike rack, this rack is made to carry one bike secured using a tire clamp platform.