In Store Pick-Up in Bend, Oregon
We installed crossbars and a cargo box onto a 2021 Subaru Forester Wilderness edition. The crossbars were manufactured by Yakima and are known as the the Timberline Kit, they attach to the vehicle by wrapping around the existing siderails. The cargo box was manufactured by Thule and is known as the Pulse Large, this box has 16 cubic feet of storage and can only open on the passenger side.
We installed sidesteps, crossbars and a cargo basket onto a 2019 Toyota 4runner. The sidesteps were manufactured by N-Fab and bolted onto the vechiles frame. The crossbars are known as the Timberline Kit and they attached by wrapping around the vehicles existing siderails. Attached to the crossbars is the cargo basket known as the Skinny Warrior, this basket provides storage up to 58 inches long and 23 inches wide. We also attached a Thule RodVault 4 to the crossbars, it is made to carry up to 4 pairs of flyfishing rods.
We installed crossbars and a ski rack onto a 2019 BMW X5. The crossbars are manufactured by Thule and the ski racks by Kuat. The crossbars are attached by clamping around the vehicles existing siderails using Thule Kit 186007 and Evo Flush Rail foot pack. Kuat's ski rack known as the Switch 4 has the ability to hold up to four pairs of skis and can fold down for aerodynamic performance when not in use.
We installed an electric retractable truck bed cover onto a 2018 Ford F150 King Ranch edition. The cover was manufactured by Retrax, part #T-90373. Since this is an electric cover the owner can open and close the cover almost effortlessly with the use of a handheld remote control. This installation required us to build the system prior to putting it into the truck bed and secure it by clamping the rails onto the vehicles existing side rails. Once in the truck, we wired the cover to vehicles battery by doing a power run and connecting it to a wiring harness provided by Retrax. We would recommend a second pare of hands for this installation.
We installed crossbars and an awning onto a 2008 Ford E350. All of the products installed onto this van were manufactured by Thule. The crossbars installed were the TracRac Van 2 Bar setup, they attached by gripping around the vehicles existing gutter edge. Once the bars were on the vehilce we installed the Hideaway awning. This awning stretches 8.5 feet long and 6.5 feet wide. It opens and closes easily with a hand crank and awning supporting tension arms to setup once in desired location.
We installed a platform onto the canopy of a 2019 Chevrolet Colorado. The Pioneer Platform was attached onto a RSI SmartCap Canopy using Rhino Racks Universal Modular Backbone rails that attached to the canopy's roof tracks. Some other accessories that were mounted on the platform include an eyebolt kit, Rotopax and a 7 gallon RoadShower from Yakima.