In Store Pick-Up in Bend, Oregon
We installed a 1.25 inch receiver hitch onto a 2014 Subaru WRX. This hitch was manufactured by Curt and has a tongue weight capacity of 200 lbs and gross trailer weight capacity of 2,000 lbs. This install was tedious dealing with an after market exhaust, it should be done by professionals.
We install a roof platform rack onto a 2017 Mercedes Sprinter. This roof platform rack was manufactured by Aluminess. In addition to mounting the roof platform we added: awning, solar panels, and roof top tent. The installation was tedious and should be done by professionals.
We installed a platform rack onto a 2020 Toyota Tacoma. This is a Pioneer Platform made by Rhino Rack and is attached to the vehicle with what is known as a Backbone. To attach the Backbone to the vehicle we secured it to the existing fixed points and weather stripping. The Pioneer Platform has planks with track mount channels for future accessories. The load rating capacity is 220 lbs.
We installed a roof rack onto a 2017 Jeep Wrangler. This roof rack was manufactured by Garvin Wilderness. To install this rack it required us to drill into the vehicle and install stabilization brackets. This installation was tedious and should be done by professionals.
We did a track installation with platform onto a 2019 Toyota Tacoma. The platform is from the Pioneer series manufactured by Rhino Rack. This platform is weight rated for 220lbs and is equipped with channels within the panels for mounting accessories. The platform is supported via RLT 600 feet that are mounted into RTS track within the vehicles weather stripping. Mo
We installed a truck bed rack and side steps onto a 2020 Jeep Gladiator. The truck bed rack is the Overhaul system manufactured by Yakima, this system is height adjustable and has a weight capacity rating of 500lbs. The side step we used were manufactured by Westin, they are attached with brackets to the underside of the frame.
We installed a crossbars and rooftop tent onto a 2018 Jeep Wrangler Rubicon. The crossbar setup used was manufactured by Rhino Racks and is supported by their Backbone system. This installation required us to drill into the hardtop of the vehicle and install metal supports on the inside
We installed canopy crossbars onto a 2019 Ford F150. The crossbar setup we found that would work best for the vehicle is manufactured by Rhino Rack. The crossbars we used are VA 150B and are attached to the vehicle with RLT 600 feet. The SUP rack is made by Thule known as the SUP Taxi, this device is made to carry 2 paddle boards at a time and locks
We installed Crossbars and a Bike Rack onto a 2018 Nissan Nismo. The crossbars were manufactured by Thule using Wingbar Evo 135 and Rapid Crossroads. The crossbars have a weight rating of 165 lbs. The bike rack is Thule's 2 bike Helium Platform. This bike rack fits 26”-29” wheel sizes up to a 3” wide tire. Receiver and bike locks included.