NOTICE: WE DO NOT SHIP

In Store Pick-Up in Bend, Oregon

Chevrolet

  1. 2018 Chevrolet Colorado - Crossbars and Backbone Platform - Rhino Rack

    We installed crossbars and a backbone platform onto a 2018 Chevrolet Colorado. All products involved are manufactured by Rhino Rack. The crossbars were installed over the cab of the vehicle using Quick Mount Ditch Bracket part #QMFK08, Quick Mount Leg part #RLT600, and Vortex Bars part #VA126B. Attached to the crossbars is the XTray Large basket that has a load capacity rating of 165lbs. Installation of the Backbone Pioneer Platform system was made up of two parts; the Backbone Rails #RUMB1, and the Pioneer Platform part #52102F. Both of these installations required us to drill into either into the vehicle or the canopy and should be done by trained specialists.
    Read more »
  2. 1998 Chevrolet Express 3500 - Ladder and Basket - Aluminess / Yakima

    We installed a ladder and basket onto a 1998 Chevrolet Express 3500. The ladder was manufactured by Aluminess, and was mounted on the driver side of the vehicle by drilling into the underside frame and under the roof gutters to attach brackets for the ladder to attach to. The MegaWarrior roof basket was manufactured by Yakima, dimensions: L 52.00 in x W 48.00 in x H 6.50 in. Attached to the sides of the basket are the Yakima Axe-Shovel bracket, as well as the Yakima High-Lift Jack bracket. The basket attached the customers pre-installed Thule Gutter mount crossbars.
    Read more »
  3. 2019 Chevrolet Colorado - Platform and Accessories - Rhino Rack

    We installed a platform onto the canopy of a 2019 Chevrolet Colorado. The Pioneer Platform was attached onto a RSI SmartCap Canopy using Rhino Racks Universal Modular Backbone rails that attached to the canopy's roof tracks. Some other accessories that were mounted on the platform include an eyebolt kit, Rotopax and a 7 gallon RoadShower from Yakima. 

    Read more »
  4. 2018 Chevrolet Silverado 1500 - Power Steps - AMP Research

    We installed power steps onto a 2018 Chevrolet Silverado 1500. The manufacturer of the steps was AMP Research. This model of side steps is equipped with lighting as the side steps fold down upon doors opening. The install required drilling into the vehicle and a power run to the engine with use of a controller. The installation was difficult and should be done by trained specialists. 
    Read more »
  5. 2021 Chevrolet Colorado - Platform & Backbone - Rhino Rack

    We installed a platform rack onto a 2021 Chevrolet Colorado.  This is a Pioneer Platform made by Rhino Rack and is attached to the vehicle with what is known as a Backbone. To attach the Backbone to the vehicle we secured it to the existing fixed points and weather stripping. The Pioneer Platform has planks with track mount channels accessories pictured such as Maxtrax Recovery Boards, Rhino Racks Spare Tire Holder Straps, and Rhino Racks Stow-it made to hold a shovel or axe.  The load rating capacity is 220 lbs.

    Read more »
  6. 2021 Chevrolet Silverado 2500 HD - Canopy - RSI SmartCap and Crossbars

    We installed an RSI SmartCap and Yakima Crossbars onto a 2021 Chevrolet Silverado 2500 HD. The RSI SmartCap is one of the strongest canopies in the industry constructed from steel it can support up to 330lbs of payload when moving, 770lbs when parked. The rooftop tent on top of the canopy is supported by the Yakima Skyline system that is held into place by the mounting channels built into the SmartCap. The assembly and installation for this canopy is difficult and requires multiple trained specialists. 

    Read more »
  7. 1996 Chevrolet 1500 - Front Hitch - Curt

    We installed a 2" front hitch onto a 1996 Chevrolet 1500. The front hitch is manufactored by Curt #31042. This hitch was relatively easy to install, attached using preexisting weld nuts. We did however have to make modifications and trim the front bumper to make room for the front hitch. The weight capacity rating is 5,000 lbs. gross trailer weight and 500 lbs. tongue weight. Featured in the hitch is the Kuat Shepra 2.0 bike rack.

    Read more »
  8. 2020 Chevrolet Colorado - Canopy Rack - Rhino Rack / Thule

    We installed a track style canopy rack with water sport accessories onto a 2020 Chevrolet Colorado. The roof rack system we found that works best for fiberglass canopies is made by Rhino Rack. This installation required us drill through the canopy and install the track using bolts, nuts and silicone sealant. Once attached, the feet that we used are Rhino Racks RLT 600's

    Read more »
  9. 2020 Chevy Silverado 1500 Trail Boss - Bed Cover, Ski and Bike Rack - Retrax / Yakima

    Yesterday we installed crossbars with ski and bikes racks onto a bed cover for a 2020 Chevy Silverado 1500 Trail Boss. The bed cover we used for this vehicle is the Retrax XR. This bed cover has channels that run along side the rail system that aloud the feet and crossbars to

    Read more »
  10. 2019 Chevrolet Suburban - Roof Rack - Yakima

    Read more »
Page