FREE Express Shipping On Orders $99+
|
Monthly Archives: June 2022
11 Posts
-
June 27, 2022We installed a winch, backbone platform system, and sidesteps onto a 2022 Jeep Wrangler. The winch was manufactured by Warn Industries using parts # 87310, 100650 and 101255. This installation was tedious and required us to take apart the entire front bumper to attach the winch and make sure the electrical components work. This was no easy process and required multiple hours of work from our trained specialists. The platform setup was manufactured by Rhino Rack and is supported using their Backbone system. This installation required us to drill into the hardtop of the vehicle and install metal supports on the inside that line up with the roof fixtures to go where the bases are positioned. Attaching to the bases is the pioneer platform that has channels that run the length of the slates for mounting of accessories such as the ones pictured (sunseeker awning, hi-lift jack, recovery boards). This installation was tedious and requires a second pair of hands. The sidesteps were manufactured
-
June 27, 2022We installed a 2" receiver hitch onto a 2022 Audi Q7. The hitch was manufactured from Stealth Hitches. Hitch towing capacity is 8,000 lbs and has a 800 lbs tongue weight. This hitch's tongue can be temporarily removed when not in use.
-
June 27, 2022We installed a platform and backbone system onto a 2022 Toyota Rav4. The platform and backbone were manufactured by Rhino Rack using part numbers 52109F and RTRB1. The backbone rail system was installed into fixed points along the vehicles existing flush rails and attached to those rails was the pioneer platform that we preassembled before installations. This platform has channels that run the length of the slats for mounting of future accessories.
-
June 14, 2022We installed crossbars and a backbone platform onto a 2018 Chevrolet Colorado. All products involved are manufactured by Rhino Rack. The crossbars were installed over the cab of the vehicle using Quick Mount Ditch Bracket part #QMFK08, Quick Mount Leg part #RLT600, and Vortex Bars part #VA126B. Attached to the crossbars is the XTray Large basket that has a load capacity rating of 165lbs. Installation of the Backbone Pioneer Platform system was made up of two parts; the Backbone Rails #RUMB1, and the Pioneer Platform part #52102F. Both of these installations required us to drill into either into the vehicle or the canopy and should be done by trained specialists.
-
June 14, 2022We installed a platform onto a 2006 Subaru Forester. The platform was manufactured by Prinsu and has planks with track mount channels for future accessories to be mounted. This install required us to drop the headliner and drill into the vehicle to attach support brackets for the platform. This roof rack provides a great platform for overlanding equipment or a roof tent.
-
June 09, 2022We installed crossbars and kayak racks onto a 2017 Honda CRV. The crossbars and kayak racks were manufactured Thule. The crossbars are made up of Kit 3166, Rapid Podium foot pack and Wingbar Evo 135B. On this setup, the kayak rack known as the Thule Hullavator is mounted into the channel of the crossbars. The Hullavator is equipped with a gas strut to help ease the process of loading and unloading the kayak as it comes down to the side of the vehicle. The load capacity of the Hullavator is 75lbs per boat.
-
June 02, 2022We installed a truck bed cover and crossbars onto a 2022 Toyota Tundra. The truck bed cover was manufactured by Retrax part number #T-80861, this is a retractable cover that has channels that run the length of the side rails to allow crossbars to be mounted. The crossbars were manufactured by Yakima using the Landing Pad 1, Skyline foot pack, and Jetstream crossbars.
-
June 02, 2022We installed a ladder and basket onto a 1998 Chevrolet Express 3500. The ladder was manufactured by Aluminess, and was mounted on the driver side of the vehicle by drilling into the underside frame and under the roof gutters to attach brackets for the ladder to attach to. The MegaWarrior roof basket was manufactured by Yakima, dimensions: L 52.00 in x W 48.00 in x H 6.50 in. Attached to the sides of the basket are the Yakima Axe-Shovel bracket, as well as the Yakima High-Lift Jack bracket. The basket attached the customers pre-installed Thule Gutter mount crossbars.
-
June 02, 2022We installed crossbars onto a 2018 Jeep Grand Cherokee. The crossbars were manufactured by Yakima and attached to the vehicles existing flush rails using Landing Pad 18, Skyline foot pack, and Corebar crossbars. This setup has a weight capacity rating of 165 lbs. The installation required some pre-assembly of parts and screwed into fixed points in the flush rails.
-
June 01, 2022We installed a 2" receiver hitch onto a 2023 Kia Sportage. The receiver hitch was manufactured by Draw-Tite part #76509. This hitch has a 3,500 lbs. Gross Trailer Weight and 525 lbs. Tongue Weight rating. It was installed by bolting into the vehicles existing weld nuts within the frame.
Categories
-
Recent Posts
